ERBE Erbotom ICC 200

ERBE Erbotom ICC 200 Electrosurgical Unit

The ERBE Erbotom ICC 200 Electrosurgical Unit delivers over 200 watts of high-frequency power for advanced tissue cutting and coagulation. Designed to provide multiple coagulation and cutting modes—including Auto Cut, Endo Cut (ideal for use with snare wires and sphincterotomes), Forced Coagulation, Soft Coagulation, and Bipolar Coagulation—this unit ensures sharply defined, reproducible cutting quality and effective hemostasis. Its innovative design features automatic open and closed-loop control for consistent results, while adjustable settings in 1-watt steps and a 7-segment display enable precise power control for delicate procedures.

Key Features

• Multiple Coagulation & Cutting Modes:

  • Auto Cut: Provides reproducible, consistent cutting with automatic open/closed loop control.
  • Endo Cut: Optimized for use with snare wires and sphincterotomes; ideal for polypectomy and papillotomy procedures.
  • Forced Coagulation: Efficiently stops bleeding by creating sparks with small surface electrodes, such as TUR resection loops.
  • Soft Coagulation: Delivers controlled coagulation with minimal carbonization; activated via key or pedal.
  • Bipolar Coagulation: Offers consistent cutting control with low voltage (below 200 Vp).

• Advanced Power & Control:

  • Adjustable HF power output from 1 to 200 watts in 1-watt increments.
  • Precise control via up/down keys with a 7-segment display showing HF power limitation to three decimal places (±1 digit or ±15%).
  • Automatic power control (PPS) for stable operation.

• Versatile Electrosurgical Performance:

  • Rated frequency of 330 kHz for unmodulated sinusoidal voltage in cutting and soft coagulation modes, and 1 MHz for pulse-modulated forced coagulation.
  • Multiple HF voltage peaks depending on the mode (up to 2300 Vp in forced coagulation).

• Robust Operating Conditions:

  • Intermittent operation mode with an ON time of 25% (e.g., 10 sec ON, 30 sec OFF).
  • Operates reliably under varied environmental conditions, with shipping/storage temperatures from -40°C to +70°C and operational temperatures from +10°C to +40°C.

Detailed Specifications

Dimensions

• Width: 280 mm (5.9 in)
• Height: 152 mm (11 in)
• Depth: 368 mm (14.5 in)
• Weight: 8 kg (17.6 lbs)

Operating Mode & Environment

• Operating Mode:
  • Intermittent operation: ON time 25% (e.g., 10 sec activated / 30 sec deactivated)
• Shipping & Storage Conditions:
  • Temperature: -40°C to +70°C
  • Relative Humidity: 10% to 95%
• Operational Conditions:
  • Temperature: +10°C to +40°C
  • Relative Humidity: 5% to 80% (non-condensing)

Power Conditions

• Rated Power Voltage:
  • Options: 240V / 230V / 115V / 110V / 100V ±10%
• Frequency:
  • 50/60 Hz
• Power Current:
  • 3.0 A at 230–240V; 6.0 A at 100–115V
• Standby Power Consumption:
  • 25 Watts; 150 mA at 230–240V (300 mA at 100–115V)
• Max HF Power Consumption:
  • 450 Watts, 690 VA
• Fuses:
  • 2 slow burn fuses: 4 A at 230–240V; 8 A at 100–115V
• Potential Equalization Terminal:
  • Yes

Energy & HF Voltage Details

• Cutting Modes (Auto Cut, Endo Cut):

  • Unmodulated sinusoidal HF voltage; crest factor C = 1.4 at RL = 500 ohms; rated frequency 330 kHz; maximum HF voltage at RL = 8: up to 600 Vp.

• Soft Coagulation:

  • HF-rated power: 120 watts at 125 ohms; peak voltage up to 190 Vp.

• Forced Coagulation:

  • Pulse-modulated AC with a crest factor up to 11 at low watt settings; rated frequency 1 MHz; maximum peak voltage up to 2300 Vp (versions 2 & 3); HF-rated power 120 watts at 350 ohms.

• Bipolar Coagulation:

  • HF-rated power up to 150 watts at RL = 500 ohms; maximum voltage controlled by software.

• Adjustment & Display:

  • HF power limitation is set via up/down keys with a 7-segment display (3 decimal places) and precision of ±1 digit or ±15%.
  • Automatic power control (PPS) and activation via key or pedal for both cutting and coagulation modes.