Midmark Ritter M11

Midmark Ritter M11 UltraClave Automatic Sterilizer

The Midmark Ritter M11 UltraClave is a robust, self-contained steam sterilizer tailored for high-volume sterilization needs in medical and dental offices, hospitals, clinics, nursing homes, and laboratories. This advanced sterilizer is designed to optimize sterilization processes efficiently, with a set of features aimed at reducing the time and effort needed for the sterilization of heat and moisture-stable reusable items.

Key Points

• Intuitive Operation:
  Features an intuitive display with simple prompts, making it easy to select from four pre-programmed sterilization cycles: Unwrapped, Pouched, Packs, and Handpieces.

• Safety and Efficiency:
  Includes a Dry Cycle Door Stop that prevents the door from fully opening if slight residual pressure is still present in the chamber, enhancing safety and efficiency.

• Temperature and Pressure Monitoring:
  Equipped with sensors to monitor chamber temperature and a pressure relief valve to manage steam pressure, ensuring safe and effective sterilization.

• Large Capacity:
  Offers a spacious sterilization chamber with a diameter of 11 inches and a depth of 18 inches, accommodating large trays and a variety of instruments.

Specifications

• Dimensions:

  • Height (With Printer): 17.9 in. (45.2 cm)
  • Width: 17.8 in. (45.2 cm)
  • Depth (With Plug): 23.8 in. (60.5 cm)
  • Counter Area Required: 17.8 x 21 in (45.2 x 53.3 cm)

• Chamber Size:

  • Diameter: 11.0 in (22.9 cm)
  • Depth: 18 in (46 cm)
  • Large Tray: 9 in x 15 in x 1 1/8 in (22.9 cm x 38 cm x 2.9 cm)
  • Small Tray: 6 5/8 in x 15 in x 1 1/8 in (14.3 cm x 38 cm x 2.9 cm)

• Weight:

  • Empty: 99 lbs (44.9 kg)
  • Full: 111 lbs (50.4 kg)

• Water Reservoir Capacity:

  • Approximately 1.4 Gallons (5.3 liters) to the full mark
  • Usable Volume: 1 Gallon (3.8 liters)

• Electrical Requirements:

  • 115 VAC, 50/60 Hz, 15 Amps, Single Phase with a 1425 watt tubular immersion heater
  • 230 VAC, 50/60 Hz, 10 Amps, Single Phase with a 1500 watt tubular immersion heater

• Chamber Pressure:

  • At 270 °F (132 °C): 27.1 psi (182 kPa)
  • Safety Valve Setting: 40 psi (275.8 kPa)

• Heat Emission:

  • 5000 BTU/Hr during operation

• Fuses:

  • 115 VAC models: F1: 0.250 amp, 250 V, Slo-Blo; F2: 15 amp, 250 V, Fast-Acting
  • 230 VAC models: F1: 0.125 amp, 250 V, Slo-Blo; F2: 8 amp, 250 V, Fast-Acting

• Safety Standards:

  • UL Listed to U.S. & Canadian Standards
  • UL 61010-1, 2nd Edition; IEC 61010-2-040, 1st Edition
  • CAN/CSA C22.2 No. 61010-1, 2nd Edition; CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st Edition
  • Meets ASME Boiler and Pressure Vessel Code requirements